After Successful SAP Installation is done you have to do post activities before system use or we can say handover to consultants
Post Steps same Either SAP ECC or S4/HANA System
➜ SAP Installation Step by Step Guide with Video
01) SAP GUI Installation – Especially If you use for Personally Use at Home System
02) If you roll out in Office then push the IP address to All the Users SAP GUI
03) Start SAP MMC Services so SAP Server will up Service
After Successfully completing the Part Post Activity such as SAP MMC Steps, SAP GUI Installation, and IP Address setting need to login and perform Activities at the Application Level
04) Check T-Code SICK – If any installation Error then you can check
05) Client Copy
06) SAP Load Generator (SGEN)
07) Apply License
After successfully completing the SAP Installation Part, post-activity tasks like SAP MMC Steps, SAP GUI Installation, and IP Address setting must be completed. The requirement to Create Clients Now
08) Client Creation (SCC4)
09) Client Copy from the 000 or 001
10) Profile Selection
11) Parameter Selection
12) SAP* Parameter Value
13) RFC Creation for Client Copy
After following all the mentioned steps completed you can hand over or start using SAP for Daily use. As per Industry Roll Out there are lots of things you have to check but all the steps are not in any specific order it’s depended on requirements but all the important steps are covered in the SAP installation blog with Post Activities
Hi sir, I am trying to install SAP ECC EHP 8 but the following error message is showing can you please give the solution
An error occurred while processing option SAP Business Suite 7i 2016 > EHP8 for SAP ERP 6.0 ABAP > SAP ASE > Installation > Application Server ABAP > Standard System > Standard System (Last error reported by the step: Caught ::ESyException in module call: At line 228 file D:/depot/bc/753_REL/src/ins/SAPINST/impl/src/syslib/network/syxxcnwmgt.cpp Call stack: CThrThread.cpp: 83: CThrThread::threadFunction() CSiServiceSet.cpp: 63: CSiServiceSet::executeService() CSiStepExecute.cpp: 915: CSiStepExecute::execute() EJSController.cpp: 187: EJSControllerImpl::executeScript() JSExtension.hpp: 1136: CallFunctionBase::call() iaxxcnetwork.cpp: 129: iastring CIaOsNetworkConnect::callMemberFunction(iastring const& name, args_t const& args) iaxxcnetwork.cpp: 340: iastring CIaOsNetworkConnect::getDNSDomainName(args_t const& _args) iaxxbnetwork.cpp: 53: CIaOsNetwork::getDNSDomainName_impl() syxxcnwmgt.cpp: 144: iastring CSyNetworkMgtImpl::getDNSDomainName() const Unable to determine parameter “DNS domain name”. DNS domain name is not configured in resolv.conf (UNIX) or the registry (Windows) and neither getaddrinfo nor gethostbyname could retrieve it. ). You can now:
It seems you have skipped or wrongly maintained OS Prerequisite steps, it shows DNS issue, check your System Host file, IP
Hi, Am unable to login through sapinst. can you please provide me the username and password for getting the installation of sap ecc 6.0. When I click the application its asking username and password (E:\SAP ECC 6\SWPM 1.0 NW 7.0-20251214T134249Z-3-001\SWPM 1.0 NW 7.0)
Thanks and Regards
It is your System ID and Password that you have to give. We have not set any Credentials
You can refer post below for more common confusion
https://pitcia.com/resources/sap-installation-support/
Thank you, sir, now I am installing the ECC6.0 EHP6. But I need the files for EHP8. In the above list what are files can I download, please suggest.
Yes, You can refer same post where you will find EHP8 Files too, for information you can refer EHP8 Installation Video Steps
Noted sir,
I am getting the error SAP ERP 6.0>SAP Application Server>ABAP>SAP Sybase ASE>Central System> Program “Migration Monitor’ exists with error code 103
Try to start SAP from SAPMMC and try again
Sir, am installing ECC6.0 EHP8, but unable to attached sap files to installing page, it saying not supporting files. (The files are locating in Other Media folder)
Requesting you to suggest on this
Please share error screenshot or Log
I installed the ECC6.0 EHP6 in my system. can you please help for license update. Here showing only 3 months
Please help me on license update
Yes, Please drop an email on info@pitcia.com
Hi Sir, can you please provide SAP ASE 16 and above to install the EHP8
Yes, You can follow the same Steps of SAP ECC6 EHP6 with Sybase 16
Hi sir, I am trying to install SAP ECC EHP 8 but the following error message is showing can you please give the solution
An error occurred while processing option SAP Business Suite 7i 2016 > EHP8 for SAP ERP 6.0 ABAP > SAP ASE > Installation > Application Server ABAP > Standard System > Standard System (Last error reported by the step: Caught ::ESyException in module call: At line 228 file D:/depot/bc/753_REL/src/ins/SAPINST/impl/src/syslib/network/syxxcnwmgt.cpp Call stack: CThrThread.cpp: 83: CThrThread::threadFunction() CSiServiceSet.cpp: 63: CSiServiceSet::executeService() CSiStepExecute.cpp: 915: CSiStepExecute::execute() EJSController.cpp: 187: EJSControllerImpl::executeScript() JSExtension.hpp: 1136: CallFunctionBase::call() iaxxcnetwork.cpp: 129: iastring CIaOsNetworkConnect::callMemberFunction(iastring const& name, args_t const& args) iaxxcnetwork.cpp: 340: iastring CIaOsNetworkConnect::getDNSDomainName(args_t const& _args) iaxxbnetwork.cpp: 53: CIaOsNetwork::getDNSDomainName_impl() syxxcnwmgt.cpp: 144: iastring CSyNetworkMgtImpl::getDNSDomainName() const Unable to determine parameter “DNS domain name”. DNS domain name is not configured in resolv.conf (UNIX) or the registry (Windows) and neither getaddrinfo nor gethostbyname could retrieve it. ). You can now:
It seems you have skipped or wrongly maintained OS Prerequisite steps, it shows DNS issue, check your System Host file, IP
Sir aap ke jesa swpm open nhi ho raha hai mera wala google chrome me open ho raha hai or mene bhut try kya magar nhi ho raha hai mere se sir please help me sir
There are two SWPM we have uploaded — One for Browser Based which is updated version
for SAP ECC6 EHP6 you have to user other one (old) — Please check same name which shown in the Video and use
Hi sir,
Thank you for your great content.I encountered a issue when i was logging in with SAP* on client 100.It said Name or password is incorrect.I do not know the password.What I entered for password is the same as the one when logging in with user sap* on client 000.Please help me.Thanks in advance!
100 Client — Here you have to enter the mater password which you have set on installation time
000 password — pass* you can try this
Hello,
I have this error in the steep 21/56 could you please help
INFO 2025-04-06 15:42:43.597
An error occured and the user decided to retry the current step: “|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_SYB_DB|ind|ind|ind|ind|SYB_DB_CONTEXT|0|syb_step_create_db_data_file”.
INFO 2025-04-06 15:42:43.597
Working directory changed to C:/Program Files/sapinst_instdir/BS2011/ERP606/AS-ABAP/SYB/CENTRAL.
INFO[E] 2025-04-06 15:42:50.526
FSL-01027 Account user=”Administrators” does not exist.
INFO[E] 2025-04-06 15:42:55.218
FSL-01027 Account user=”Administrators” does not exist.
INFO[E] 2025-04-06 15:42:59.942
FSL-01027 Account user=”Administrators” does not exist.
INFO[E] 2025-04-06 15:43:04.650
FSL-01027 Account user=”Administrators” does not exist.
INFO[E] 2025-04-06 15:43:14.661
FSL-01027 Account user=”Administrators” does not exist.
INFO[E] 2025-04-06 15:43:19.432
FSL-01027 Account user=”Administrators” does not exist.
INFO 2025-04-06 15:43:21.840
Switched to user: SAPINDIA\sybsmm.
INFO 2025-04-06 15:43:21.903
Creating file C:\Program Files\sapinst_instdir\BS2011\ERP606\AS-ABAP\SYB\CENTRAL\isql.log.
INFO 2025-04-06 15:43:21.903
Switched to user: SAPINDIA\sybsmm.
INFO 2025-04-06 15:43:21.918
Output of isql -w999 -Usa -SSAPINDIA:4901 is written to the logfile isql.log.
WARNING 2025-04-06 15:43:26.032
Execution of the command “isql -w999 -Usa -SSAPINDIA:4901” finished with return code -1. Output:
Password:
CT-LIBRARY error:
ct_connect(): network packet layer: internal net library error: Net-Lib protocol driver call to connect two endpoints failed
ERROR 2025-04-06 15:43:26.32
CJS-00030 Assertion failed: Execution of SQL script reports an unexpected error. Refer to trace file sapinst_dev.log for further information.
ERROR 2025-04-06 15:43:26.032
MUT-03025 Caught ESAPinstException in module call: .
ERROR 2025-04-06 15:43:26.63
FCO-00011 The step syb_step_create_db_data_file with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|onehost|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_CreateDB|ind|ind|ind|ind|createdb|0|NW_SYB_DB|ind|ind|ind|ind|SYB_DB_CONTEXT|0|syb_step_create_db_data_file was executed with status ERROR ( Last error reported by the step: Assertion failed: Execution of SQL script reports an unexpected error. Refer to trace file sapinst_dev.log for further information.).
INFO 2025-04-06 15:43:26.220
Creating file C:\Program Files\sapinst_instdir\BS2011\ERP606\AS-ABAP\SYB\CENTRAL\__instana_tmp.xml.
Thank you
IT seems you don’t have administrator user in your system, you can check log for more details
Hello Sir ,
I am not able to get the file SAPCAR in your Drive inside your folder OF SWPM 1.0 NW7.0
And If I download the outside file and run the command sapcar -xvf *.*
I get the following bellow error
sapcar : The term ‘sapcar’ is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ sapcar -xvf *.*
+ ~~~~~~
+ CategoryInfo : ObjectNotFound: (sapcar:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
Suggestion [3,General]: The command sapcar was not found, but does exist in the current location. Windows PowerShell does not load commands from the current location by default. If you trust this command, instead type: “.\sapcar”. See “get-help about_Command_Precedence” for more details
Please let me know the soltuion
First you need to put sapcar file and then you can execute
Dear Sir,
Please SWPM old modal download link dejeye new modal itna samjh me nhi aa raha hai
Please jo swpm aap use kiye ho uska download link dejeye
SAP not Support Old SWPM
When can I get the SAP GUI Setup? I don’t have S-User Account
Same Post, you can get the Download link
Thank you very much for your guide. I’ve done and it works perfectly. Is it possible to change/install another language? I’m a beginner, I’ve tried with SMTL but it doesn’t allow it. Thanks again!
congratulation for succesful installation
other language not possible – require sap support for this installation